橡胶接头

可曲挠橡胶接头分类及详细介绍

   按性能可分为三类:通用型、特种型和耐热型。
   It can be divided into three types according to performance: general type, special type and heat resistant type.
可曲挠橡胶接头分类
   1)橡胶软接头的一般用途:适用于-15℃~80℃的水输送,适用于浓度在10%以下的酸液或碱液的输送。橡胶是由天然合成橡胶制成的。
   1) the general use of soft rubber joints: applicable to 15 ℃ ~ 80 ℃ water, suitable for concentration below 10% transfer of acid or alkaline solutions.Rubber is made from natural synthetic rubber.
可曲挠橡胶接头分类以及详细介绍
   2)特殊类别:适用于耐油、耐堵塞、耐臭氧、耐磨损、耐化学腐蚀等特殊性能要求。橡胶球材料为三元乙丙橡胶、氯丁橡胶、顺丁二烯比组成.
   2) special category: suitable for oil resistance, blockage resistance, ozone resistance, wear resistance, chemical corrosion resistance and other special performance requirements.The rubber ball material is composed of epdm, neoprene and malebutadiene.
   3)耐热型:适用于输送温度高于80°C的水。橡胶球由纯EPDM橡胶制成。

   3)Heat resistant type: suitable for conveying water temperature higher than 80 ° C.Rubber balls are made of pure EPDM rubber.

橡胶接头


橡胶接头减震器金属软管空气弹簧成功案例行业资讯关于我们联系我们

Copyright © 2018 上海松夏减震器有限公司 版权所有 All Rights Reserved.